Distributed generation and modern power systems require generation technology that’s more adaptable to the influx of intermittent renewable energy without compromising the quality of power, all while keeping costs down. PMGs, with their ability to integrate within the architecture of wind, hydro power, or hybrid systems, have become the generation technology of choice. They deliver significant technical advantages that differentiate them from conventional generation systems, beginning from an eliminated excitation loss all the way up to offering design integration options, including direct drive.
Superior Efficiency Through Eliminated Excitation Losses
A Permanent Magnet Generator (PMG) is a special type of a synchronous machine that replaces traditional field windings on the rotor with powerful high performance permanent magnets. As no external rotor field winding and exciter system are present, any kind of rotor field excitation losses associated with conventional synchronous machines will no longer exist. Conventional machines can spend up to 30% of their internal losses just feeding rotor excitation and due to this disadvantage and several other factors they may not be able to reach the levels of over 97% of efficiency on whole operating points like PMGs that you will see in below.
When operating a range of speeds, PMGs maximize your annual energy production for least lifetime cost. The full range efficiency of PMGs can greatly increase output compared to competitors and it becomes increasingly advantageous when applied the technology to renewables which deal with constantly fluctuating wind speeds and flow rates. Add to this, that the PMG typically works alongside full converter design and the fact that they remove your generator from grid faults altogether, they do offer a very real alternative to conventional approaches.
Brushless Construction Enabling Long-Term Reliability
The PMGs utilize a brushless, slotless configuration. This makes the PMGs completely free of the detrimental effects of cogging torque or mechanical losses. This setup eliminates the friction, heat generation and wear associated with carbon-brushes in variable, low speed renewable energy applications such as solar and small wind power generators.
The reliability implications are of paramount importance: Mechanical gearboxes are completely done away with on direct-drive machines, cutting out the need for gearboxes maintenance and their limited life expectancy; The robust rotor design requires no excitation or cooling so minimum of wear, minimal maintenance and best life cycle cost are assured; In case of installation in remote or offshore sites the accessibility of machine is not good, so minimum of reliability implies better results from the project.
Versatility Across Low-Speed and High-Speed Applications
A wide range of renewable energy sources is benefiting from the versatility of PMG technology. The high torque and low-speed efficiency of PMG systems allow them to efficiently convert energy from sources that operate at slow speeds including those associated with, pico-hydro and a direct-drive wind turbine which avoids the need for a step-up mechanism.
On the other hand, PMGs lead to the smallest envelope dimensions and biggest efficiency at every speed in high-speed, full converter topologies. Thus, the power system designer can design his drive train architecture on the base of site-specific criteria.
Advanced Grid Support and Integration Capabilities
The grid has transitioned to not only requires electricity generation, but the grid to be supported. PMGs can provide grid support through the power system by utilizing sophisticated grid-forming control that can provide frequency support during normal operation and improve grid stability during disturbances. PMGs with full converter technology can be deployed for enhanced grid compliance, low THD and control during grid transients.
Modular design allows simple serial/parallel connection for variable power ratings Many PMG architectures are of modular design and can be flexibly cascaded or paralleled to fulfill a wide range of power requirements. From small-scale distributed generation to large utility-scale projects, PMGs offer suitable performance and functionality for grid-connection in up-to-date power systems. The concept of a “full-converter” isolates the generator from grid-fault events and delivers optimal performance and enhanced grid-code-compliance.
Jiangsu DHC Environmental Si-Tech Co., Ltd. incorporates PMGs into advanced hybrid wind and solar systems with 15 years of renewable energy experience, making Jiangsu DHC the ultimate partner to integrate PMG into highly reliable hybrid renewable power systems. High-power efficiency and a wide-range of grid capabilities, which contribute to DHC's hybrid renewable energy solutions, offer unparalleled performance for current grid applications. Discover the benefits of using high-performance PMG in an energy system for today.