EN
European market for PVs with thermal functions (PVT) is growing rapidly, due to the necessity of using limited roof space in order to obtain maximum energy from it. In contrast to standard PV panels, which only generate electricity, PVT panels can generate both heat and electricity from the same surface area with overall efficiencies of up to 80 per cent. If you are looking for trusted PVT solutions in Europe, then these are the three top suppliers – and one of them has an innovative hybrid solution.
1. Jiangsu DHC Environmental Si-Tech Co., Ltd. – The Hybrid System Integrator
the requirements for a hybrid system integrator that are changing:
Jiangsu DHC is unique for integrating PVT solar panel into fully-fledged wind-solar hybrid systems. European manufacturers are mainly interested in the PVT panel, while DHC has developed the complete system – consisting of 600W mono hybrid PVT panels, wind turbines, LiFePO4 batteries, solar heat pump systems and intelligent wind controllers.
DHC has been working in the renewable energy field for 15 years and has established strategic partnerships with D******e, G******t, C******r and J*******r, offering cutting-edge solutions for all kinds of applications such as home applications, farms, container houses and distributed power stations in Europe. DHC is built on a concept of “quality as the basis, and service to the customer”. With the motto "quality as the basis, and service to the customer", DHC takes no chances with false promises in terms of real power output. As buyers look for a PVT panel, they are also interested in the option of a full hybrid renewable energy system which combines solar, wind, battery storage and heat pumps, DHC has a strong value proposition.
2. D******n – The Pioneer with TOPCon Technology
Since 2010, in Marseille, D******n is one of the most renowned PVT manufacturers in Europe. It's flagship SPRING4 425 TOPCon hybrid panel is made of N-type TOPCon PV cells and aluminum rear heat exchanger.
The SPRING4 has the following key features:
Wp output of PV power: 425 Wp and module efficiency of 21.8 percent
The bulk density of the soil (BD): 1.35 g/cm³
Total panel dimensions: 1722 x 1134 x 71 mm
Weight: 36.3 kg
There is a 30-year linear power output warranty (87.4 percent retained after 30 years)
Suitable for use in environments of thermal stagnation temperature: 70℃
The panel is tailor-made for the use with air-to-water or brine-to-water heat pumps. D******n panels are tested panel by panel to guarantee quality and Solar Keymark certified. The SPRING4 can be used for domestic hot water production (up to 60 percent cost savings), space heating and for pool heating. D******n is a good solution for homeowners and installers who want to install a PVT panel of a well-known European brand.
3. S******x PVT – The Industrial Scale Innovator
S******x PVT is a German manufacturer located in Saxony, that constructed a 120,000 module/annum plant. It also won a PX-1 PVT module which was named a finalist in The smarter E AWARD 2025, for its innovative hybrid solar technology.
The PX-1 module has a number of major features:
PV power output: 400-440 W (21.8-22.5 percent efficiency)
Flammability: Non-flammable
Over 80 per cent overall system efficiency.
Weight: less than 30 kg – can be installed with any standard PV mounting systems.
The electrical power production can be increased by 5–10 per cent by using active cooling with a brine-to-water heat pump.
Up to 4 times the energy generation/per square meter compared to conventional PV.
S******x modules can be attached to all the well-known brine-to-water heat pump setups, won't require an outside unit and are quieter and easier to install than air-source heat pumps. The company has already delivered large-scale PVT projects, such as 300 PVT modules which were installed for a new Swiss hospital. Among the industrially manufactured and cost-effective panels, S******x is one of the best PVT panels. S******x panels have been supported with large scale reference projects.
Summary
Europe has a variety of PVT solutions available of varying size. D******n offers the best in French-made TOPCon panels and a 30-year warranty – perfect for the residential heat pump integration. S******x PVT is a German engineering product with industrial level production and high efficiency (over 80%). Jiangsu DHC offers the most complete solution for customers who want to have the hybrid PVT solution integrated with wind, battery storage and heat pump.
All three suppliers have Solar Keymark or equivalent certification, meeting the European standards, and qualify for renewable energy incentives. Please contact Jiangsu DHC to learn how their photovoltaic combined heat and power (PVT) system can power your next European project. This system uses next-generation PVT panels designed specifically for the integration of PVT with heat pumps.
